How To Change A Lockset

Turn the locking nose with the key downwards so that it is flush with the rest of the lock. Remove the two screws in the existing strike plate and pull it off.

How To Change A Door Lock Mitre 10 Easy As Diy Youtube

Then put in your new deadbolt.

How to change a lockset. Insert the deadbolt in the upper slot and secure it with screws. Follow the same procedure when installing the new lock. Remove Existing Lockset 1 Open the door for easy access to all fasteners and components.

In the pack youll find a new strike place and two short coarse-thread screws similar to what you used in the thickness of the door for the locking mechanism. Replacing a door lock can be reduced to the following steps. Some folks might want to order their lock online as they check this site shows you the best budget impact driver that you can use to make the process of changing your lockset more convenient for yourself.

Remove the Door Knob and Replace Latch Begin by removing the screws from the door knob on the interior side of your door. Paint over the block to match the rest of the doorjamb. Start by removing the existing lockset.

Detailed explanation of how to replace a door lockset AKA doorknob. To find the right place you need a little bit of sensitivity and a slight back and forth movement of the key. So first position the strike plate on the door screw in the screws on all sides of it with the help of a screw driver.

Next install the new lock set. Use the screwdriver to remove the retaining screws that hold the inside and outside knobs together. To change a door lock first unscrew the knobs and take them off.

If youre installing a lockset in an existing door take out the old lockset and measure the backset the distance from the door edge to the center of the lockset hole. Installing the new lock set. You can then install the new latch and lock replace the strike plate and put the knobs back on.

Buy a new lock that matches your existing locks keyway rekey the new lock to your existing house key remove the old lock install the new latch install the new lock body check for proper latch operation to ensure your lock is secure. If you have a deadbolt use a screwdriver and an Allen wrench to take it apart. Next take the lock apart and remove the strike plate and latch.

If the new lockset is a different color or finish and you want it to match then you have one more step. Remove the two screws from the latch plate on the edge of the door and remove the latch from the opening. Place two screws from your new door lock kit in the doorjamb to hold the template in place then use the bit from your lock installation kit to drill a hole where the new doorknob will go.

Though the screws are usually visible on the inside of the lockset some knobs are removed by depressing a tiny latch on the spindle. Mine is a Kwikset Once you know the brand of lock to install go to the hardware store and pick up the same kind of lock. The measurement is usually 2-38 inches for interior doors and 2-34 inches for exterior doors.

Since I am an amateur I would not chance to order something online. Once youve removed the door lock template you have a space perfectly primed for your new lock. Use a screwdriver or drill with a screwdriver bit to remove any visible screws in the edge of the door such.

This allows you to pull the door knobs off the door from both sides. Then push the block into the correct position in the door fitting.

How To Change A Doorknob How Tos Diy