How To Change Brakes

Step 5 - Tighten the Clamp. Steps for changing your brake pads.

How To Change The Brake Pads Brandon Cadillac Service

Slide in the new brake pads.

How to change brakes. Unbolt the calipers and swing them free then remove the clips holding the brake pads in place and remove the brake pads from their mounting bracket. Slide out the old brake pads. However in many cars it will work to engage the parking brake with the button.

Turn the Allen wrench counterclockwise to loosen the bolts. Be sure there are no other parts on the table that can get mixed up with the components as you transfer them from the old set to the new one. Learn how to replace your brakes yourself and save more than half the cost of a shop.

Inspect the brake disc. I show you every step including how to. Remove the slider bolt.

Use an Allen wrench to loosen the bolts holding the brake pads in place. Step 3 - Remove the Brake Pads. Step 4 - Check the Brake Disc.

If theres any scoring you need to get that replaced too. The best way to do this is to use the diagnostic tool or parking brake tool to do. Pivot the caliper up.

You will hear the parking brake motors sound for 2-3 seconds until the parking brake is engaged. Need new brake pads and rotors. Replace the retaining clips.

Dont loosen the bolts all the way or the brake pads will come out of the brake pad holder. Lay out the new brake pad set on a table then place the brake shoe set you just removed from the vehicle down on the table next to it. Place the new brake set next to the old one.

How To Change Your Brakes All On Your Own Autoguide